Lotion Pump is a device that is widely used in conveying and compressing mixed gas and steam, liquid and solid. Gas or liquid is often used as a power medium. The use of emulsion pumps to generate vacuum is another very important application.

The main principle of the emulsion pump is that the liquid or gas ejected by the power nozzle at a high speed drives and accelerates the surrounding liquid, gas or solid. This movement results in a mixture of driven and carried animal qualities. The velocity of the jet decreases at the divergence and the pressure increases. Unlike traditional pumps, lotion pumps have no moving parts during operation.

The lotion pump can be made of various materials, such as cast iron, steel, stainless steel, Hastelloy, titanium, enamel, glass, plastic, and graphite, and can be made in various sizes. When the suction volume is from 1 to 2,000,000m3/h and the suction pressure is 10-2mbar, the size can be from a few centimeters to more than 30 meters.

Because of the diversity of emulsion pumps, it has been widely used in various fields, such as chemical reactors, exhaust systems, water treatment equipment, mixing tanks, storage tanks, wastewater treatment equipment, heating systems, heating gas supply systems, power plants, Swimming pool, salmon factory water supply, etc. And the formation of vacuum in different industrial fields.

The formation of vacuum in emulsion pumps using steam as the motive medium is an important application field. Its high-speed jet is equivalent to several times the speed of sound, so the emulsion pump can easily handle large-volume materials in a vacuum.

Because the lotion pump can only overcome a limited compression ratio, when the suction pressure is low, several lotion pumps are installed in series. The suction pressure of the multi-stage steam jet vacuum pump can reach as low as 0.01 mbar. In order to condense most of the motive water vapor and reduce the suction volume to a small amount, a condenser is generally placed between the two emulsion pumps. According to the application, use direct contact condenser or surface condenser.

Through the above introduction, Mist Pump Wholesaler hopes that you can simply refer to the content of this article in future use.

https://www.jhglassball.com/