PE Tubes installation requirements
1. Before construction, do a visual inspection of the pipes, fittings, etc., and those that are found to be problematic cannot be used.
2. Due to the lightweight of the HDPE pipe body,...
Pe Tubes Factory introduced that the emulsion pump head body, as the core component of the hydraulic end of the plunger pump, bears great pressure. Therefore, the finite element analysis of the pump head body is of great...
Pe Gasket Suppliers introduces the materials of silicone rubber:
1. Silicone rubber series
Equipped with advanced testing equipment, clean and dust-free workshop. Products are widely used in electronics, medical equipment,...
In our daily life, we can use a lot of products such as foaming agents. The generation of foam is related to the foam pump head used. The manufacturer of foam pump heads is well-known, but what else does it have to do with?...
Steel Balls Manufacturers introduced that rubber materials have excellent heat resistance, cold resistance, ozone resistance, and atmospheric aging resistance. Has very good insulation properties. However, the tensile...
- December 14 2021 at 22:32
PE Tubes Factory introduced the sealing gasket installation requirements:
1. The gasket and flange sealing surface should be cleaned, and there should be no scratches, spots, and other defects that affect the sealing...
Steel Balls Suppliers introduces the types of influencing factors of steel balls:
①The influence of material density: steel balls, cast iron balls, alloy steel balls, etc., the density of different materials is different,...
- November 16 2021 at 22:04
Chromium alloy is the main component of wear-resistant steel balls. It has high oxidation resistance and high sulfur resistance, diesel fuel, seawater corrosion resistance, and its strength density is much higher than that...
Rubber Rings Manufacturers introduces the precautions for making solid balls. The raw material of the cullet particles is sent into the combustion chamber under the action of the carrier airflow. The glass particles flowing...
Plastic Balls Manufacturer introduces the difference between cast steel balls and forged steel balls
1.The diameter of the mill is large, and the impact toughness of the steel ball is high. The impact toughness of high...
- September 2 2021 at 03:07