Lotion Pump is usually made of PP plastic, can have many different designs, and usually has a lock or lock function to prevent accidental output. This is a component design that can separate one pump from another in terms of appearance design. This is also the part where ergonomics plays a role in improving consumer satisfaction. This assembly screws the entire assembly to the bottle at the end of the neck. It is a common destination for neck polishing, for example, it is usually made of PP plastic, and is usually designed with ribbed sides or smooth sides. In some cases, a shiny metal casing can be installed to give the lotion pump a high-end, elegant appearance.

The gasket is usually friction-fitted to the inside of the closure, and it acts as a gasket barrier on the bottle groove area to prevent product leakage. This outer gasket can be made of many materials according to the manufacturer's design: rubber, LDPE are just two of the many possible options. Sometimes referred to as the pump assembly housing, this assembly fixes all pump assemblies in place and serves as a transfer chamber that sends the product from the dip tube to the actuator and ultimately to the user's hand. This part is usually made of PP plastic. Depending on the output and design of the lotion pump, the size of the housing may vary greatly.

Through the above introduction, Plastic Balls Wholesaler hopes that you can simply refer to the content of this article in future use.