How To Use Ratchet Buckle Manufacturers' Ratchet Strap Instructions

1. First open the ratchet handle hardware and align the open slot of the ratchet up.
2. From the bottom of the ratchet hardware, slowly thread the webbing through the slot in the center of the closed ratchet spool.
3. Next pull the webbing through and remove any excess slack or loose webbing so that the webbing is firm but not tight.
4. Begin the ratchet by raising and lowering the ratchet handle, tightening the straps by removing excess slack to hold the cargo in place. Make sure that the ratchet straps are comfortable to secure your cargo, but not so tight that it damages the cargo you are securing.

How to Loosen the Ratchet Strap Instructions

1. To release the strap, pull and hold the release tab on top of the ratchet assembly to cancel the ratchet function. This will allow you to turn on the ratchet hardware.
2. Open the ratchet hardware until it is fully open and the ratchet is fully flat.
3. Grasp the polyester tie-down webbing from the free side and begin pulling the webbing out of the ratchet to release.
4. With the webbing removed from the hardware, pull and hold the release tab on top of the ratchet to close the ratchet for next use.

For more product-related information, please click:Ratchet Strap

our website: https://www.china-tiedowns.com/
our website: https://www.china-tiedowns.com/product/ratchet-buckle/