In fact, many people will find that when they use water at home, no matter how tightly the stainless steel faucets are closed, it will always drop a drop of water invisible after a long time. They often choose to use a water basin or a small bucket to catch the leaked water. They always think that they will save some water fees. They will always be complacent, but in fact we think It's all wrong, can this really save water costs? Will the faucet drip, will the water meter go? Many people don't know and waste money in vain.

Now most of the newly built buildings will choose the new type of water meter when they are renovated, which is different from the old water meter. Although it also uses water flow to drive the water meter to work, its sensitivity is higher than that of the old mechanical water meter. It ’s a lot more sensitive, so even a drop of water from your faucet will be counted on the water meter, even if we ca n’t see it when we look at it with our eyes, it ’s actually water that belongs to your home. They are all recorded, so do n’t take this chance.

There is also a situation where some old communities still use the old-fashioned water meter. This kind of water meter is a mechanical type. It uses the water flow to calculate the amount of water used, but if there is water, it is too much. If the flow rate is too small, it will not be enough to drive the water meter to work. Therefore, in the case of such a faucet dripping, the water meter will not go away.

There is a plastic gasket in the faucet. If the faucet is always dripping, the gasket may be broken. We need to buy a new gasket and replace it. Of course, there are different types of faucets, and the methods of maintenance are also different. Let's take the example of faucets with left and right switches.

1. First, we prepare some tools, including pliers and screwdrivers.
2. Remove the screw cap on the faucet, and then use a screwdriver (driver) to remove it.
3. Then we remove the rotating handle on the faucet to expose the valve core combination.
4. We use pliers to unscrew the spool.
5. Disassemble the valve core, we will see the structure of the valve core, there is a red seal ring inside, we add a gasket on the seal ring, it can play a very good effect, if there is no gasket accessories , You can take the inner tube of the tire according to the size of the sealing ring, and cut out a circle to make a gasket.
6. Then assemble it again, reinstall it, and see if it is still dripping.

information about Stainless Steel Faucets : https://www.afastainlesskb.com/product/stainless-steel-faucets/