Corrugated Plastic Sheet Suppliers Introduces Use and maintenance of Corrugated Plastic Case :

1. The calcium plastic turnover box should avoid long-term exposure to the sun to avoid aging and shorten the service life.

2. Handle with care during use to avoid uneven force and damage when landing.

3. It is strictly forbidden to throw the plastic turnover box from a high place to avoid breaking and cracking the turnover box due to violent impact.

4. It is strictly forbidden to throw the goods from a high place into the plastic turnover box. Reasonably determine the stacking method of the goods in the turnover box, and avoid the sharp surface directly pressing on the bottom of the turnover box. Goods should be placed evenly, not concentrated and eccentrically stacked.

5. When stacking is used, the load-bearing capacity of its own turnover box should be considered, and the stacking height should be paid attention to.

6. When using the plastic turnover box, the load of a single box should not exceed 80% of the rated value, and the box should not be full. A gap of at least 20mm should be left to prevent the goods from directly contacting the bottom of the box, causing damage or dirt to the product.

7. When using the matching pallet, you should consider whether the size of the turnover box is suitable for the use of this plastic pallet, so as to avoid improper size, improper placement, and side tilt, or inverted box.

8. The combination code of the calcium plastic turnover box should be properly strapped and wrapped on the plastic pallet to facilitate the use of mechanical loading, unloading, and transportation, so as to meet the requirements of loading, unloading, transportation, and storage.

Through the above introduction, Corrugated Plastic Case Manufacturers hopes that you can simply refer to the content of this article in future use.
https://www.yfcorrugatedplastic.com/