Industrial Sprocket Supplier introduces the skills of maintaining the chain:

1. Before starting the chain, check whether the chain is running normally and whether the tightness of the saw chain is normal.

2. Remember to block the chain brake before launching, so as to stop the chain and prevent risks during launching. However, the chain brake must be released before work, otherwise the bearing will be damaged.

3. When the chain is rolling, be careful not to conflict with the ground or other objects.

4. The chain should be oiled in time to change the anti-rust paint, etc., once the chain is rusted, it should be exchanged in time to improve work efficiency.

5. It is necessary to frequently stop checking and maintaining the chain, and repair the broken chain and disconnection situation in time, and find out the reason.

Through the above introduction,Conveyor Chain Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.hzqjchain.com/