Today's LED floodlights are very common, some are easy to load and unload, but some loading and unloading is very troublesome, so please do not install them without full control, because LED floodlights will be affected by various conditions. The following Outdoor Flood light manufacturers will share the correct installation process and installation considerations:

First, the installation process of LED floodlights:
1, install the guardrail, punch holes in the wall, according to the actual requirements, usually within 3 cm.

2, do anti-static measures, such as the workbench to be grounded, workers wear the corresponding electrostatic clothing, anti-static measures, due to different levels of LED floodlights of different quality, anti-static ability is also different.

3, installation attention to seal, poor sealing, diameter affects the service life of LED floodlights.

4, LED floodlight wiring is preferably no more than 25 cm, the transformer power can be lengthened accordingly, otherwise it will affect the brightness.

Second, LED floodlight installation instructions:
1. Try to use the series LED form because the LED floodlight voltage difference is special. The peak current of a normal LED is maintained at 80 mA and the reverse voltage is equal to or higher than 6 V. In LED applications, attention should be paid to the peak voltage and current of the circuit design.

2, the welding voltage is less than 25 watts, the soldering iron can only control 300 degrees Celsius under the SMD LED exposed at high temperature, do not squeeze the epoxy part, or wipe with a sharp hard object, because the LED light is very fragile, very Fragile, welding time is 3 seconds.

information about Outdoor Flood light : https://www.xiangruilight.com/product/flood-light-honeycomb-series/