Metal Composite Panel is a composite material formed by metallurgical bonding of metals with different properties at the interface using various composite technologies. Today we will talk about two of the preparation methods of the Metal Composite Panel.
The explosive billet-rolling method is a production method in which the required base and composite materials are explosively welded and then rolled to a composite strip of required specifications and dimensions through a hot rolling mill. This method is a new combination technology developed by integrating the respective advantages of explosive clad technology and rolling technology. Its advantages are: the explosive clad method of billet production ensures the quality of the bonding zone of two or three-layer metal composite plates; The dimensional accuracy is high, and the surface quality is good; it increases the flexibility of production and is convenient for promotion.
The process of the cast-rolling composite method is: stacking two steel plates, coating the inner layer with a stripping agent, welding all around, and placing them in a casting mold filled with molten metal. After the liquid metal is solidified, the initial rolling is performed, and finally, the welding is performed. Cut off the edges to obtain a composite board. High composite strength can be achieved under proper temperature and pressure. This method has a simple process and low cost and can be used for mass production.
For more details, please visit Stainless Steel Composite Panel . alubang.net