The sink inside the kitchen has been used for a long time, and there will definitely be many problems. If you don't solve it, it will be uncomfortable to face these problems every day. Some problems may not be a hidden danger. that
Stainless Steel Handmade Sink Manufacturers Let's ask everyone how to deal with these problems?

First, rust, watermark or scratch
There is a watermark inside the stainless steel sink, which is generally due to the residual water stain in the sink, and the mark that remains after natural evaporation. Tap water is usually disinfected by adding some chlorine at the water plant. A small amount of tap water accumulates on the surface of the stainless steel sink and naturally evaporates. After a long period of precipitation, the chlorine is adsorbed on the purified film on the surface of the stainless steel, and then a watermark is formed.

As for the scratch of the stainless steel sink, this is a problem that cannot be completely avoided. Because the kitchen sink is the most frequently used utensil in the kitchen life. What pots and pans are washed in the sink. Collision friction is essential. It can be said that scratching is one of the most widespread shortcomings of stainless steel sinks.

Solution: The floating rust, rust corrosion, watermark, scratch and other problems of the sink can be solved with a scouring pad. Take the scouring pad, touch the toothpaste, push along the brushed texture of the hand-made sink, and simulate the method of hand-drawing to make the sink look new. If the situation is serious, use a small piece of 240# sandpaper at most, first push it with sandpaper, and then use the scouring pad to push it. Put a hand drawn picture.

Second, the cabinet seeps water, the wet under the sink, the table surface condensation, etc.
The installation of kitchen sinks is generally divided into on-stage installation, Taichung installation and under-counter installation. The installation method for each installation method is different, but one thing is the same. That is how to install glue. Unless it is welded with stainless steel countertops. A large part of the water seepage in the cabinet is due to the gap in the side of the sink, which is not sealed. Thereby letting the water flow into the gap. After a long time, it will erode the cabinet, mold and so on. Severe sinks can fall directly to the ground.

Therefore, the general solution is only to glue, glass glue, silica gel, AB glue and so on. The main function is to prevent leakage and leakage, and also to stabilize the sink. However, the current glue has a long life, it is easy to age and fall off. Therefore, after the leak was found, it was necessary to re-seal the edge.

The underside of the sink is damp and the countertop is condensed. This is a very serious case of wet cabinets. The back of the kitchen sink will generally have a silencer and anti-condensation coating. The purpose of this coating is to prevent condensation of water droplets. However, there is no such coating on the countertop, so be sure to keep the underside of the sink dry and ventilated, especially the smooth drainage and sealing of the sewer. The sink is originally exposed to water, making it easy to humidify the surrounding environment. If the climatic environment also has an impact, such as when the temperature difference between day and night is large or when you return to the south, you should pay more attention to keep the kitchen ventilated during the day and close the window at night. This is also to prevent further deterioration of the kitchen cabinet environment.

information about Stainless Steel Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/