China Industrial Sprocket Company introduces the precautions for the use and maintenance of the chain:

1. When installing the chain, check whether the chain is running normally and whether the tightness of the saw chain is normal when the chain is activated.

2. Remember to close the chain brake before starting, so that the chain can be braked to prevent danger during starting. However, the chain brake must be released before work, otherwise the bearing will be damaged.

3. When the chain rotates, be careful not to rub against the ground or other objects.

4. The chain should be greased and painted with anti-rust paint in time. Once the chain is rusted, it should be replaced in time to improve work efficiency.

5. The chain should be checked and maintained frequently, and the chain should be repaired in time if the chain is broken and the cause should be found out.

6. Lubricating the chain is a necessary maintenance, which can not only improve work efficiency, but also extend the service life of the chain.

7. The commonly used lubrication method for the chains of household machinery is to regularly oil the chains with an oil can or an oil brush.

8. For mechanical chains that are inconvenient to use tools to brush the oil, use an oil cup to drip oil to the gap between the chain plates through the oil pipe.

9. Oil bath lubrication or splash lubrication, this is to use a sealed transmission box, a part of the chain is immersed in the oil, and the back is splashed by the oil pan.

10. Use oil pump pressure for oil injection lubrication, which is the continuous supply of oil to the chain by the oil pump, so that the circulation plays a role of lubrication and cooling.

Through the above introduction, China Conveyor Chains Company hopes that you can simply refer to the content of this article in future use.

https://www.hzqjchain.com/