After using the stainless steel shower faucet for a long time, it is easy to block due to the water quality and quality. Many people don't know what to do. Next, Lavatory Cabinet Manufacturers will share with you how to deal with the blockage of the stainless steel shower faucet.

1. Needle puncture: If the stainless steel shower faucet in your house is partially blocked by small holes, then let the water flow first, and you can see that the holes are blocked at the bottom. Then you have to turn on the stainless steel shower faucet head of the shower, and you can see that there are many small holes on the stainless steel shower faucet head like a shower head. This is where the water comes out. Then we first prepare a needle, and then use the needle to pierce the impurity in the perforation with the small hole that we just saw without water until there is no impurity in the hole. This method is the most straightforward, but be careful to puncture the stainless steel shower faucet hole.

2. Dip with vinegar: If your stainless steel shower faucet has been blocked for a long time, and a lot of holes have been blocked. So using a needle to pierce one by one is obviously not showing up. In this case, it is recommended that you use acidification to remove dust to solve the problem of clogging of the stainless steel shower faucet of the shower. You need to prepare some white vinegar. Pour the vinegar into a basin so that the stainless steel shower faucet can be submerged. About ten minutes after soaking in vinegar, the scale in the stainless steel shower faucet can be removed.

3. Use lubricant: If the metal of the stainless steel shower faucet is rusted and the blockage is very serious, then use WD-40 rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. If your stainless steel shower faucet is not made of stainless steel, you may use this method.

4. Wipe with a towel: If your stainless steel shower faucet has been around for a certain number of years, and the appearance is relatively old. It is better to replace it with a new shower. The continued use of such a stainless steel shower faucet is not good for health. Because there may be a lot of harmful bacteria and impurities gathered inside.

Through the above introduction, Stainless Steel Faucets Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.afastainlesskb.com/