Lifting chains are chains that can be widely used in mines. The safety of lifting chains is high, but the chains cannot be welded. The following Motorcycle Chain Manufacturers will introduce why the lifting chains cannot be reused after welding.

The lifting chain is composed of multiple chain links. The size and pitch of each chain link are specified. On the same lifting chain, these data should be equal, but if it is welded after welding, The link data will be different from the data of other unwelded links, which will affect the service life of the entire lifting chain.
1. The welded chain will have obvious traces, but during the lifting process, the chain runs within the lifting sprocket, and the increase in the data of the chain will increase the wear of the chain and the sprocket and reduce its service life.
2. Welding will destroy the integrity of the chain. When lifting and transporting, the load-bearing capacity of the welding part will be weakened, increasing the risk of chain breakage.

Through the above introduction, Silent Chain Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.hzqjchain.com/