No matter how good the quality of stainless steel sinks are, no matter how hard the brand is, we need to use and maintain them reasonably. Because no one buys it and replaces it after two years. The longer the life expectancy, the better. The following Stainless Steel Sink Manufacturers will introduce to you how to make the sink last longer?

(1) After we buy the stainless steel sink, it is usually installed directly during renovation. However, since the decoration materials are not yet air-dried, they will emit corrosive gas to oxidize the surface of the sink, so we should ventilate the kitchen.

(2) After installation, try not to put some strong bleaching powder, household chemicals and soap on or in the sink for a long time. This is a bad habit, because it will easily cause corrosion to stainless steel over time.

(3) Many of us like to use steel wire balls to wash dishes. This is no problem, but after many people wash the dishes, they directly use the steel wire balls to wipe the sink. Try not to use this. Beautiful; the second is to reduce the service life.

(4) If the sewage does not flow away for a long time and stays at the bottom of the sink, you can rinse it with clean water, and then wipe off the impurities with a loofah. If you can’t wipe it off, you can clean it up with vinegar and an aqueous solution (20% vinegar, 80% water). Of course, it’s better to have a special stainless steel cleaning emulsion.

(5) Try to clean the sink immediately after use, because the minerals in the water may easily cause rust spots for a long time, or the minerals in the water react chemically with each other to reduce the corrosion resistance of stainless steel.

Through the above introduction, Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use.