What is the cause of the Motorcycle Chain is chipping, cracking or deformation?

First, the chain pitch is too large or the number of sprocket teeth is too small. If the pitch is too large, the cooperation between the roller and the gear is not good, which simply causes the roller to crack; if the number of teeth is too small, the roller cannot be completely stuck, and it simply causes the roller to crack. Protection method: According to the actual situation, select the end-pitch chain or add the number of sprocket teeth.

Second, there is debris in the tooth groove of the sprocket, and the roller is kneaded by the debris, causing cracking. Protection method: remove the debris in the gear groove, or replace the new chain.

Third, the climbing position of the chain on the sprocket teeth is too high. Because the chain does not match or is too loose, the climbing position is too high. Protection method: replace the new chain, or properly tighten the chain according to the situation.

Fourth, the impact force on the chain is too large to exceed its load. Protection method: reduce load and influence on the chain.

The above content is organized and shared by the Silent Chain manufacturer, hoping to help more people.