Below, Stainless Steel Sink Manufacturers share the characteristics of high-quality sinks:

1. Noise treatment: The bottom of the high-quality water tank is sprayed or glued with a rubber sheet, which will not fall, which can reduce the noise caused by the water at the bottom of the basin and play a buffering role.
2. Surface treatment: The surface of the high-quality sink is smooth, the gloss is soft and soft, it is not easy to adhere to oil stains, it is easy to clean, and it is wear-resistant.
3. Internal angle treatment: The internal angle of the high-quality sink is close to 90 degrees, the view of the sink is larger, and the volume of the sink is larger.
4. Supporting parts: high-quality dripping head needs wall thickness, smooth operation, no water leakage when closing the cage, durable and comfortable beading function. The downpipe requires environmentally friendly disposable materials, has functions such as easy installation, deodorization, heat resistance, and aging resistance, and is durable.

The stainless steel sink manufacturer confirms the size of the sink and the size of the hole to be dug, and then determines the installation position of the sink, marks the hole line, uses a hole opener, and needs to adjust the number of holes and the tightness of the water basin. Then grind the corresponding edge on the edge of the hole according to the figure, and insert the glass glue under the hole. After placing the water basin at a later stage, use super glue to reinforce it. When installing the sink, the front and back of the work surface should be clearly distinguished. If the sink is installed on the countertop, the punching position should be changed.

In order to prevent the surface of the faucet from being accidentally damaged when installing the angle valve in the stainless steel sink manufacturer, it is recommended to put the angle valve on the plastic bag cover before operation. When connecting the cold and hot water pipes, the method is to connect the hot water pipe at the left end and the cold water pipe at the right end. During the installation process, please pay attention to the tightening force. If the force is too large, the thread is easily damaged, resulting in loose screws. If it is too small, it may cause water leakage due to insufficient sealing. Therefore, after installing the water tank, be sure to carefully check the leak tightness of the overflow hole and the filter basket.

The above content is organized and shared by Stainless Steel Laundry Cabinet Manufacturers, hoping to help those in need.