What should I pay attention to when installing Industrial Sprocket?

1. First choose the correct sprocket model and material according to different mechanical equipment models.

2. Check whether the part where the sprocket is installed is intact, whether each link component and fastening are intact, if there is a problem, it needs to be adjusted or replaced in time.

3. Install the sprocket according to the correct method, install the master and slave sprocket in place, tighten various fasteners and connectors, if necessary, please ask the professional to draw the installation drawing first, and then install it.

4. After installing the drive chain and adjusting the tightness, check that the chain and the sprocket are smoothly matched and that there is no interference with the chain cover; the driven chain should be reinforced after installation, because the driven sprocket is easier to loosen. If necessary, sprockets and chains can be regularly maintained and lubricated. Long-term lubrication and maintenance can increase their service life.

5. If there are parts that need to be replaced, don't just replace the chain or sprocket, but replace it as a complete set. Replacement of the product alone will aggravate its wear, and if it is difficult, the manufacturer can perform professional maintenance.

www.hzqjchain.com