The sink and faucet area is one of the most commonly used areas in any kitchen and is often regarded as the focal point of the room's design. Upgrading your kitchen faucet is a simple and economical way to quickly refresh your space, or to complement the entire kitchen. A new faucet changes the appearance of the entire space. Choose wisely so you can find the best product for your home and know what to look for before buying.

Mint green cabinet, yellow T-shirt, black industrial metal faucet, chrome plated.
Work smart

The kitchen Telescopic Faucet is one of the most widely used items in the room, which is not surprising, but it may be the news about how many improvements have been made to this simple fixture. In addition to choosing comfortable handles for hot and cold water lines, there are more options. When choosing a new faucet, it's a good idea to explore the different styles, finishes and functions available. The right design will look great for many years and increase the value of your home-while meeting the needs of your busy kitchen. Understand the options with a broader perspective and bring home the most suitable ones.

Before you shop, it’s helpful to understand what you want the end result to look like. Take inventory of the styles and colors you want to emphasize and emphasize in the kitchen, as well as the size of your sink and countertop, so you can compare them when you consider buying a new faucet. The most important part of choosing a new faucet is that you are satisfied with the new kitchen product after installation, so always keep the final product in mind when browsing.

Woman, light pink shirt, man, light blue shirt, tool belt, red rag.
Adjust the size of the kitchen faucet

Pick up the tape measure, because it's time to get some numbers. It is usually easier to find a faucet that works within the allowed space than it is to rebuild the kitchen to accommodate the faucet. As with all home improvement projects, choosing a new faucet requires some educated placement decisions, what kind of sink area you wish to complete, and the range of tasks it will be used for.

This means that you should know the width and depth of the basin, especially when compared to the size of the dishes, pots, and plates you plan to wash in the sink. Any faucet you buy needs to have a high enough outlet to handle these and other chores, and the location should be low enough to avoid too much water splashing out of the sink and causing confusion.

Similarly, if you are looking at a faucet installed on a countertop, understand how much space is behind the sink to install the faucet. The wall-mounted faucet needs to be placed at the outlet above the center of the sink, which requires consideration of the space between the inner edge of the sink and the wall. To do this, you will compare the sink size with the faucet size when narrowing down the selection.

Measure the countertop behind the sink, and the diameter of the pre-drilled holes and the distance between their centers. You need to know the width of the sink and the depth between the wall and the edge of the sink. This is important for the installation and regular use of the faucet, because you need to make sure that there is space between the wall and the faucet to fully articulate the faucet handle or lever.

Salesperson, buttoned up white shirt, black ipad, woman with tan wallet, faucet
Kitchen faucet options

When you are looking for a new kitchen faucet, you will see many other options to choose from, which will affect the overall style and operation of your home faucet. Before choosing, it is best to understand the basic configuration, understand the product information and ensure that you get the functions you need.

Type of installation

There are two types of faucet installations to choose from, the main difference lies in their location.

Brushed chrome installation, pink tropical flowers, green cabinets, marble tiles
In countertop or countertop installation, the kitchen faucet can be installed on the edge of the countertop or sink. Deck installation is a more common style, and it helps draw attention to the sink as a kitchen design element. Here, you can find the widest variety of faucets, from single-hole installation to three-hole installation, in various sizes and finishes.

Grey apron sink, bright white light, shiny chrome device, girl, red hair
Wall-mounted kitchen faucets often appear in more commercial or industrial places, with a unique and modern style. Family kitchens, laundry rooms, garages, and greenhouses often rely on wall-mounted faucets to save space. In smaller kitchens with limited counter space, wall-mounted faucets can free up counter space and provide different design options for sinks, as well as unique plumbing contours.

Grey counter, chrome-plated fixture, men's hand with blue mechanism, washer.
Faucet valve

The valve regulates the water flow and temperature from the faucet. They are the basic control device inside the main body of the faucet, which allows water to pour out from the water outlet and aerator, which can be turned on or off according to your instructions by simply turning the handle. Different types of valves work differently, which will change the function of the design, which also means that they require long-term maintenance of different types. The valve type usually describes the basic operation of the faucet and names the moving parts that prevent water leakage. There are many types, but four are more common.

Ball valve-The ball valve is identified by a single handle near the base, and can be pivoted and rotated to mix water as needed to control water flow and water temperature.
Disc valve-ceramic disc valve faucet handle can be moved up and down to control water flow, and can be moved left and right to control the amount of heat or cold in the mixing. Its name comes from the two flat discs inside the faucet mechanism, which form a seal to control the flow of water; moving the handle will separate the discs and let the water pass through the faucet. The disc valve can be replaced without replacing the entire faucet.
Cartridge valves-Cartridge valves are hollow valves and are often found in faucets with blade handles because they only need to be rotated 90 degrees to work. The filter element rotates to block the water pipe leading to the nozzle. For single-handle faucets, the filter element that moves up and down can let the water flow, and the temperature can be controlled by turning the handle left and right. When there are separate handles, such as in a three-hole or four-hole sink setting, two separate handles can separately control the hot and cold water lines to be mixed in the faucet. The filter element can be replaced without replacing the entire faucet.
Compression valve-Compression valve is usually used for older fixture styles. They look like traditional faucets with 360-degree rotating screws and knob handles. Hot and cold water are managed by separate handles, and in more old-fashioned settings, they can also be routed to different taps. Turning the handle will tighten or loosen the inner gasket, and this compression will close the water pipe. Due to the way they are constructed, damaged compression valves usually require the replacement of the entire faucet rather than a few internal parts.
Oil rubbed bronze bridge faucet, dark brown counter. Golden faucet.
Number of tap holes

If your sink is built-in, under-counter, or farmhouse design, it may be drilled or pre-drilled on the deck for taps and other plumbing fixtures. The faucet itself can take up to 3 holes, depending on the type of faucet you choose. Other fixtures, such as a soap dispenser, can also be installed for your convenience. Whether you will choose one hole, two holes, or even four holes along the sink countertop, depends on the look or style you want, and the type of faucet you choose.

For minimalist style:

Black matte gooseneck faucet with spiral arch neck. Beige tiles, white sink.
Single-hole faucets with drop-down sprayers-these can include tall gooseneck faucets, tall arches leading to the water outlet, and more industrial style pre-flush faucets with durable springs and lever handle spray hoses can be added Coverage and control. Others have the handle installed on the faucet body, and the non-contact model does not need a handle at all; just wave your hand on the side-mounted sensor, or for tomorrow’s kitchen, issue a voice command to start the water.
Single-hole faucet with side spray-Although it may be a single-hole faucet, the smaller side spray will occupy the second hole pre-drilled on the sink or countertop. This is a simple and clean appearance that does not take up too much extra space on the deck and provides versatility and practicality. A two-hole hole cover can be used to highlight the design, or to cover up a third hole in the sink that may not be needed.
Brushed chrome fixings, two handles, gray/white marble countertop, orange
works:

Two-handle faucet (3-hole layout)-In order to emphasize the artistic design of the faucet, some fixtures use hot and cold water as separate handles, one on each side of the central faucet. It visually helps to take up a little extra space along the edge of the sink and serves as the focal point of the design to attract people's attention. They are also very easy to use when doing the usual sink chores, hot or cold water can be used by turning the handle with one hand. A hole cover plate cover can also be used to cover one of the three holes to allow a faucet with a single independent control handle.
Green tiles, marble counters, rusty pears, brown wood. Chrome-plated fixtures.
Bridge faucet with side spray (4-hole layout)-The bridge faucet will have two temperature handles next to the central water pipe. Hot and cold water will flow upward along their dedicated handles, and then mix in the connection between them on the way to them. Questions, please be sure to contact one of our product experts via phone or chat. Happy home improvement!

Upgrading your kitchen faucet is a simple and cost-effective way to quickly refresh your space, or to complement the entire kitchen. In this buying guide, we will guide you through the most important things to consider when choosing a kitchen faucet to help you choose the faucet that suits you.

Type of installation

There are two ways to install kitchen faucets: counter-mounted and wall-mounted.

Counter or deck installation is the most common installation option. Here, you can find the widest variety of faucets, ranging from single-hole installation to three-hole installation. For smaller kitchens with limited counter space, or if you want a clean, industrial, and modern kitchen style, you need to consider wall-mounted faucets.

Faucet size

You need to consider the size of your kitchen faucet to find the faucet that best fits your sink, as well as any backsplashes that might hinder its operation. Check whether there is enough clearance behind the faucet so that the handle of the faucet has enough space to fully hinge.

The range and height of the water outlet associated with the sink should also be considered. The same rules apply to kitchen counter taps, and they are usually smaller in size to fit smaller counter sinks. The rule of thumb is that if it looks good, it is good. Use your best judgment here and try to find a faucet that fits your sink.

feature

Now that we have introduced the basic installation types, let's talk about the features.

Sprinkler

Sprinklers are the most common feature on kitchen faucets. They are easy to clean and easy to fill larger pots and pans. Most have a built-in spray mode selector, allowing you to switch between normal flow and high-pressure spray mode, which can help in the cleaning process.

Most sprinklers use a counterweight system that can automatically return the sprinkler to the faucet body. But a nice feature we like is the magnetic docking, which uses magnets to ensure that the sprinkler remains firmly fixed to the faucet body during normal operation.

Non-contact technology

Non-contact technology allows you to operate the faucet without touching the faucet itself.

filtering system

Some kitchen faucets have filter systems. Like non-contact technology, these faucets have separate components that must be installed under the sink. You have to make sure you have.
Abs Faucet is also a good choice, you can have a certain understanding of this, of course, if you have a lot of questions, you can contact us.
https://www.cn-kx.com/kangxuan-faucet/telescopic-faucet/