Regarding the use of wood drill bits, we usually have a lot of them, but in some special cases, ordinary wood drill bits do not affect them. This is where we will need the help of an extra long wood drill bit . So what should we do after using the extra long wood drill bit?
1. After the drill is used, it should be checked immediately for damage, passivation and other bad conditions should be immediately polished and trimmed;
2. The drill bit should be seated when storing it, and it is convenient and time-saving when it is retrieved later, which saves the time to search for the drill bit;
3. When drilling through holes, when the drill bit is about to drill through for an instant, the torque is the largest, so at this time, lighter pressure is required to advance the tool slowly to prevent the bit from twisting due to excessive force;
4. The drilling hole is too large, which may be caused by the unequal half-angle of the drill tip or the deviation of the static point, the deviation of the spindle, etc.
The above are the precautions for the use of an extra-long wood drill bit. For more details, please visit TCT circular saw blades . www.jeejatools.com