China Industrial Sprocket Company introduced the installation requirements of sprocket:

1. Choose the type of transportation based on the type.

2. Check whether the location of the installation and transmission is good, otherwise, you must frequently repair the documents based on the relative change.

3. According to the method, the installation of the master and slave is successful, and the solid parts are screwed to promote it to reach the stipulation of the stipulated expected effect.

4. After installing the transmission and adjusting the tightness and loosening the expected effect, check whether it matches the wheel smoothly and coplanar, and it is not easy to interfere with the cover.

5. Grinding of the sprocket is a manufacturing method under the condition that other metal composite materials drilling and manufacturing methods cannot take into account the surface accuracy. Because this type of method is very demanding, it is a kind of manufacturing method. Highly accurate processing technology.

Through the above introduction, China Conveyor Chains Company hopes that you can simply refer to the content of this article in future use.

https://www.hzqjchain.com/