Hex Nut Factory introduced that stud bolts have adopted large-scale equipment in the process of product processing and manufacturing to improve the processing quality of stud bolts. If the joints are thicker and the studs are longer, we will use special equipment for processing. Now, we will use high-quality metal materials to process and manufacture studs. Then the better material selected has many application characteristics in addition to the characteristics of ordinary stud bolts.

With the continuous development of stud bolt technology, the problem of bolt manufacturing has been solved. Nowadays, people are concerned about the quality of the raw materials used for bolts. If the quality of the bolt line is not good, there will be a lot of impurities. If the bolt is not hard enough, there will be many serious problems in use. Of course, the problem is that there are more than three reasons for bolt damage, but the above two reasons are the main reasons for screw damage. If the bolt is found to be damaged, it can be inspected in stages to find out the cause and the stud bolt. This is also a type of screw. Stud bolts are divided into various specifications and sizes according to materials, uses and grades. They are called studs with four patterns at both ends.

The general reason for bolt damage is: over-tightening or using the torque of an adjustable wrench or a socket wrench, because it is usually clamped between the threads and locked during the manufacturing process. If a wrench or electric wrench is used, the nut needs to be rotated perpendicular to the axis of the screw, which is likely to cause damage to the bolt.

Through the above introduction, China 2H Hex Nut Factory hopes that you can simply refer to the content of this article in future use.

https://www.ydfastener.com/