In life, we have all seen taps. How many people know about taps? Today, we share the knowledge of taps with kitchen faucets manufacturers .

1. What are the surface treatments of the faucet?
1. Chrome plating: chrome plating is the most common treatment method. It uses the first layer of acid-plated copper, the second layer of nickel plating, and the third layer of chrome-plated three-layer plating process. The international standard is 8 microns, and the maximum thickness of the faucet plating can reach 0.12. -0.15 mm.

The plating layer is well combined, the adhesion is fine, the color is uniform, the corrosion resistance is excellent, and the surface of the product is bright and beautiful, and the time is long and constant. Electroplating detection method: after acid 24H and 200H neutral salt spray test, no foaming, no oxidation, Peeling, cracking.

2. Drawing: drawing after electroplating nickel, irregular lines on the surface of the product

3. Plated bronze: electroplated bronze and then brushed

4. Painting, baking varnish, porcelain

5. Titanium-plated gold: the surface is golden and bright

Second, the water pressure requirements of the faucet
Generally, the household water pressure requirement is not less than 0.05Mpa (ie 0.5kpf/cm). After using for a period of time not lower than the water pressure, if the water output is found to be reduced, the outlet nozzle has no foam, then it can be at the outlet of the faucet. Use a wrench to gently unscrew the mesh nozzle to remove impurities, which can be restored as new.

Third, the water saving of the faucet
The average faucet water output is 16kg in 1 minute. Now the faucet bubbler has been widely watched in the market. Its advantage is that it can slow down the water flow and keep the effluent water flow below 8.3 liters/min to save water.

information about kitchen faucets manufacturers : https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet/